Basic Info.
Temperature Range
-30 ~ +70
Accuracy
+-0.5 Degree Centigrade
Typical Run Time
360 Days Max
Packaging
Food-Safety Plastic Bag
Record Cycle
29 to 360 (Days) Selectable
Resolution
0.1 Degree Centigrade
Product Description
USB disposal digital temperature recorder
TEMPACTION Data Logger is one kind of Temp Real cold chain data logger, especially for temperature monitoring during the distribution and storage of food, pharmaceuticals, chemicals and other perishable products. After record stopped, TEMPACTION can be directly inserted to the computer's USB port, and then automatically generates a PDF report without software and generate.
Product Advantage:
Without software and generate, plug and play, automatically generate PDF data report, the data intuitive visible.
IP 67 protection level.
PDF document encryption, to ensure data security.
ultra-low power consumption, recording time up to 3 months.
product unique ID, easy to trace the product trace.
variety of parameter settings, to adapt to different customer requirements.
Technical parameters:
Measurement Range:-25 ºC ~ +75 ºC(-13 ºF ~167ºF)
Accuracy:±0.5 ºC / 0.9 ºF
Resolution:0.1 ºC / ºF
Record cycle:29 to 360(days) selectable
Alarm type:Consecutive or cumulative via custom order
Temperature unit:ºC / ºF
Alarm temperature:
1,Basic produce: 2 ºC ~ 8 ºC(35.6 ºF ~ 46.4 ºF)
2,General produce: 0 ºC ~ 4 ºC (32.0 ºF ~ 39.2 ºF)
3,Meat & Dairy: -2 ºC ~ 4 ºC(28.4 ºF ~ 39.2 ºF)
4,Frozen food: -23 ºC ~ -7 ºC (-9.4 ºF ~ 19.4 ºF)
5,Other temperature alarm range available via custom order
Record time delay:Standard 30 minutes, other time configurable
Alarm time delay: Standard 30 minutes, other time configurable
Typical Run Time:360 days max
Shelf Life:1 year
Button:Start/Stop/Events/Check the running status
Events: 10 times max
Display: LED (OK, Alarm, Events, Running Status)
Report type:Encrypted PDF file and PC software
Software: Temp-Tracking
Connection:USB 2.0
Power supply:3.0V CR2032 lithium battery
Supported operating system:WIN XP/7/8/9/10 and MAC
Water proof level:IP67
Size:83.0mm L x 47.3mm W x 6.0mm H
Weight: Approx. 10.4g
Packaging:Food-Safety Plastic Bag
Carrier start the recorder instructions:
1. Keep START button pressed for minimum 5 seconds, the OK light will light up a moment till OK light flashes 5times, the recorder will enter the delay record state, during this period(about 30mins), press the START button 1-2 seconds, the OK light flashes.
2.Tear off the bar code label and paste in the recorded package. The serial number on the recorder is the same as the barcode on the PDF report to ensure traceability.
Recipient stop the recorder instructions:
Keep START button pressed for minimum 5 seconds, the ALARM light will flash some times. which indicates a successful stopping.
Obtain PDF data files from the recorder:
1. Carefully ripped plastic bags, exposing the recorder USB connector.
2 The recorder into the computer USB port, this time the recorder will automatically generate PDF data files (If the recorder is inserted into the computer during recording, it will immediately stop recording and generate a PDF data files)
3. When the folder pops up, double click the PDF file to open and view the report.
Judge the recording status:
1. If you press the START button (less than 5 seconds), the OK light is lighting up means the recorder
hasn't started record.
2. If you press the START button (less than 5 seconds), the OK light flashes means the recorder is during delay record time.
3. If you press the START button (less than 5 seconds), the ALARM light is lighting up means the recorder is recording.
4. If you press the START button (less than 5 seconds), the ALARM light flashes means the recorder has stopped record.
Note: When you press the button to check the status of the recorder, the time can't exceed 5 seconds, otherwise the recorder in standby will start or the recorder is recording will stop.
Warning status and fault judge:
1. The ALARM light flashes twice every 10 seconds (double flashes) means the recorder in stop mode and temperature is outside the allowable range during recording.
2. The ALARM light flashes automatically every 10 seconds means the recorder is recording and the temperature is outside the allowable range.
3. The OK light flashes automatically every 10 seconds means the recorder is recording and temperature is normal.
4. The OK light flashes twice every 10 seconds (double flashes) means the recorder is in stop mode and the temperature is normal during recording.
5. Any light doesn't work when you press button that means the battery is dead.
Address:
Room 212, Building B, Rong Tiansheng Industrial Park, Fuyuan 1 Road, Fuyong Subdistrict, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components
Company Introduction:
Shenzhen AKS Technology Co., Ltd. is a professional high-tech enterprise with the great capacity for developing, manufacturing and processing of consumer electronics products and security products, such as mobile phone, digital electronics products and related accessories, EAS equipment, barcode software, barcode labels, barcode ribbons, barcode scanners, data captures and barcode detectors, RFIDs.
Our company adopts a flexible production and management method, owning independent sales stores and offices. We also have established extensive cooperation and mutual relationship with a wide majority of agents and distributors.
With years of efforts, rich experience has been accumulated in the field of security products. So our products are sold to all over the world, such as Europe, America, Asia and other countries and regions. Adhering to the principle of "customer first, integrity first, quality first", our company is always seeking to provide quality products for customers for safeguarding their interests.