2017 New Single Use Temperature USB Data Logger

TEMPACTION Data Logger is one kind of Temp Real cold chain data logger, especially for temperature monitoring during the distribution and storage of food, pharmaceuticals, chemicals and other perishable products. After record stopped, TEMPACTION     can be directly inserted to the computer's USB port, and then automatically generates a PDF report without software and generate.






Product Advantage:  
Without software and generate, plug and play, automatically generate PDF data report, the data intuitive visible.
IP 67 protection level.
 PDF document encryption, to ensure data security.
 ultra-low power consumption, recording time up to 3 months.
 product unique ID, easy to trace the product trace.
variety of parameter settings, to adapt to different customer requirements.
Technical  parameters:
Measurement Range:-25 ºC ~ +75 ºC(-13 ºF ~167ºF)
Accuracy:±0.5 ºC / 0.9 ºF
Resolution:0.1 ºC / ºF
Record  cycle:6,15,30,45,60,90(days)  selectable
Alarm type:Consecutive or cumulative via custom order
Temperature unit:ºC / ºF
Alarm temperature:
1,Basic produce: 2 ºC ~ 8 ºC(35.6 ºF ~ 46.4 ºF)
2,General produce: 0 ºC ~ 4 ºC (32.0 ºF ~ 39.2 ºF) 
3,Meat & Dairy: -2 ºC ~ 4 ºC(28.4 ºF ~ 39.2 ºF)
4,Frozen food: -23 ºC ~ -7 ºC (-9.4 ºF ~ 19.4 ºF)
5,Other temperature alarm range available via custom order
Record time delay:Standard 30 minutes, other time configurable
Alarm time delay: Standard 30 minutes, other time configurable
Typical Run Time:90 days max
Shelf Life:1 year
Button:Start/Stop/Events/Check  the  running status
Events:   10 times max
Display:  LED (OK, Alarm, Events, Running Status)
Report type:Encrypted PDF file and PC software
Software: Temp-Tracking
Connection:USB  2.0
Power supply:3.0V CR2032 lithium battery
Supported operating system:WIN XP/7/8/9/10 and MAC
Water proof level:IP67
Size:83.0mm L x 47.3mm W x 6.0mm H
Weight: Approx. 10.4g
Packaging:Food-Safety  Plastic Bag

Carrier start the recorder instructions:
1. Keep START button pressed for minimum 5 seconds, the OK light will light up a moment till OK light flashes 5times, the recorder will enter the delay record state, during this period(about 30mins), press the START button 1-2 seconds, the OK light flashes.
2.Tear off the bar code label and paste in the recorded package. The serial number on the recorder is the same as the barcode on the PDF report to ensure traceability.

Recipient stop the recorder instructions:
Keep START button pressed for minimum 5 seconds, the ALARM light will flash some times. which indicates a successful stopping.

Obtain PDF data files from the recorder:
1. Carefully ripped plastic bags, exposing the recorder USB connector.
2 The recorder into the computer USB port, this time the recorder will automatically generate PDF data files (If the recorder is inserted into the computer during recording, it will immediately stop recording and generate a PDF data files)
3. When the folder pops up, double click the PDF file to open and view the report.

Judge the recording status:
1. If you press the START button (less than 5 seconds), the OK light is lighting up means the recorder
hasn't started record.
2. If you press the START button (less than 5 seconds), the OK light flashes means the recorder is during delay record time.
3. If you press the START button (less than 5 seconds), the ALARM light is lighting up means the recorder is recording.
4. If you press the START button (less than 5 seconds), the ALARM light flashes means the recorder has stopped record.
Note: When you press the button to check the status of the recorder, the time can't exceed 5 seconds, otherwise the recorder in standby will start or the recorder is recording will stop.

Warning status and fault judge:
1. The ALARM light flashes twice every 10 seconds (double flashes)  means the recorder in stop mode and temperature is outside the allowable range during recording.
2. The ALARM light flashes automatically every 10 seconds means the recorder is recording and the temperature is outside the allowable range.
3. The OK light flashes automatically every 10 seconds means the recorder is recording and temperature is normal.
4. The OK light flashes twice every 10 seconds (double flashes) means the recorder is in stop mode and the temperature is normal during recording.
5. Any light doesn't work when you press button that means the battery is dead.